Ater loss of cooling tower, because the sensible heat of water is far less than the latent heat. It's also a major source of heat removal. However, the amount of evaporation loss completely depends on the important factor of the water content of the air around the cooling tower, but the external gas factor can not be controlled by human, so it can only allow the external gas evaporation of its loss.
We are a professional enterprise engaged in the research and development and production of cooling equipment, mainly producing countercurrent, cross-flow, composite flow closed cooling towers and steel cooling towers, evaporative condensers, etc. We provide customers with integrated services such as selection, production, system construction, equipment maintenance and so on.
Cooling tower water loss cause two: splash loss.
The circulating water, which has not been cooled but has a high temperature, is sent to the sprinkler at the top of the cooling tower under pressure by PUMP and then is sprayed onto the packing for cooling. During the process from sprinklers to fillers, some small water droplets may be carried out of the cooling tower by the upward flow of air, resulting in flight loss.
Cooling tower water loss cause three: discharge loss.
Cooling tower cooling in the water supply pipe and cooling tower between the repeated absorption of waste heat action, in the process because the cooling tower is open structure, it is inevitable that there will be impurities dissolve into the water, affecting the water quality, often needed to maintain heat dissipation, but also need to evaporate its cooling water, so the salt temperature to the water rises, also lead to the growth of microorganisms and algae, so the cooling water must do a certain discharge, Sometimes it is necessary to clean the cooling tower and pipeline, and add clean water. The waste water discharged is called discharge loss.
Post time: Jun-12-2023